How to Get Water Out of Binoculars? (3 Solutions)

When you go for a tour, hiking, or seeing wildlife and sports, there is a possibility of water getting into your binoculars. It’s even very common in the rainy season as well as in winter when heavy fog is everywhere. Moreover, binoculars can get wet in many ways. You can get water out of binoculars by wiping it up immediately and drying it out by keeping it in a warm place (Not the fireplace or near the gas stove). Also, keeping them inside the rice bag or using Silica Gel Desiccant are effective solutions for drying out wet binoculars. As a binocular user, you need to be concerned and should know the ways to get rid of this problem. This article is all about 3 effective solutions on how to get water out of binoculars.

Why do you need to remove water from your binoculars?

Water and moisture are considered the enemy of binoculars. If water somehow gets into the binoculars, that will cause accumulation on the surface of the lens. You also found the lenses are foggy and cloudy. As a result, you aren’t able to see the target object properly. It will also create a blurry effect on the lens. Water and moisture are responsible for gradually down the overall performance of your favorite binoculars. The magnification power might be reduced for water. The water may fog up the glass of the internal prism to bounce off the light from the target object. Perhaps, your binoculars will produce darker images. If you aren’t concerned about it, the water can lead to corrosion on the mechanical parts as well.

There is a chance of growing lens fungus. Lens fungus is the main reason to destroy the coating on the lens surfaces. And once the fungus grows on the lens, your binoculars will not work properly, even if they won’t work in the future after repair. Water with a small amount of moisture also creates the same situation if you are not aware of cleaning your binoculars. Water and moisture crates rust on the metallic parts of the binoculars. You will get messy optical performance and also reduce the transmission rate. As a result, you will get dark spots, lower resolution, and fewer sharp images.

How to get water out of binoculars? (3 Solutions)

You already understand how bad the water and moisture are for your binoculars. Anyhow during hiking, bird watching, or fishing, the binoculars come in contact with water or fall into the water, you should immediately try to get out of the water from the binoculars. In this section, we are going to discuss the effective ways to do it. Let’s get started:

Solution 1 – Dry Out The Binoculars Naturally

The easiest and simplest way is to dry out the binoculars naturally. After getting water inside the binoculars, immediately wipe it up and keep it in a dry and warm place for a certain period. The warm environment will absorb the water and moist easily without any further processing. As you know excess temperature and direct sunlight are responsible for damaging binoculars.

Now the question is how much temperature is needed to absorb the water and moisture? Where do you keep your binoculars after getting water into them? You can keep it near the furnace or cupboard storage. These 2 are good options for you. You should be concerned about the materials of the binoculars before keeping them in a warm place. Too hot temperatures may melt the plastic and rubber materials binoculars. And it’s highly forbidden not to keep your binoculars near the gas stove or fire system.

After a few times, check whether it’s still foggy or not. If not, remove it and enjoy sightseeing again. If it is still foggy and water remains inside, you can follow the further steps.

Solution 2 – Keep In A Rice Bag

If you don’t find a proper warm place, or you are outside, this process surely helps you. Another effective and simple solution is to keep the wet binoculars in an uncooked rice bag. Keep binoculars inside the bag for the next 24 hours. After that, remove it from the rice bag and check whether the water and moisture are gone or not. Usually, after 24 hours, the rice is absorbed and pulls the water out of the binoculars. Both processes of getting water out of the binoculars are almost costless and effective as well. You need to wait for a while to get them dry and clean binoculars.

Solution 3 – Use Silica Gel Desiccant

The final technique is called the dry soak. Dry soaking is a popular technique that is used for drying out electronic devices. This technique is also useful for drying out wet binoculars as well. For dry soak, you need to use silica gel desiccant. Silica gel desiccants are popular for absorbing water and moisture from optical devices like binoculars. If you are not satisfied after applying the previous 2 techniques, you can go for this one. Keep the binoculars in an airtight box with a few silica gel desiccants.

After that, leave it for a few days after sealing the container. The desiccant will pull water out of the binoculars. You can keep the airtight container near the warp places like a warm cupboard. That will add extra benefit and warm and silica gel desiccant work for getting water out of the binoculars together. After a few days, unseal the container and check whether the moisture is still in the binoculars or not. If water exists, keep it for a few days again. If you find the binoculars perfectly dried and it’s ready to go with you on any adventure.

How to prevent water from getting into binoculars?

Now it’s very crucial to know how to prevent water from getting into the binoculars. You don’t need to worry about how you can dry your binoculars. To avoid contact with moisture and water, you should be concerned and aware when using a binocular outside. Here are some effective tips for preventing the water from getting into the binoculars:

1. Clean it regularly

It’s not mandatory to fall into the water to get the binoculars wet. Raindrops, moisture, and fog can gradually enter the binoculars while using them. After that, they started to make rust, and fungus and destroy your favorite binoculars without your concern. You should keep your binoculars clean. You should wipe with a soft cloth after using the binoculars every time. That will keep the binoculars free from building up excess fog and moisture.

2. Use the waterproof device

You should buy waterproof and fog-proof binoculars for sightseeing, hiking, or any outdoor events. As a result, the binoculars have an inbuilt water-resistant capacity. Make sure the selected binoculars have an o- ring seal and nitrogen inert gas. You don’t need to worry much to dry them out if water gets into the device. Additionally, you can anti-fog wipes, creams, sprays, and drops, to keep the binoculars safe and dry all that time.

3. Awareness

You should choose the binoculars which come with a neck strap, and anti-slip grip. As a result, the possibility of falling into the water will be reduced. After using the binoculars, use the carrying bag, and lens cover for transport and storage purposes. These techniques will help you to prevent water from getting into your binoculars.

Bottom Line

If water and moisture get into the binoculars, it will start to damage the parts of the binoculars. You need to be concerned as well as take steps to get water out of the binoculars. In this article, we have discussed some effective ways to dry out the water from binoculars. We also mentioned some ways to prevent water from getting into binoculars. Remember that, a small drop of water or moisture can build up humidity inside the binoculars and reduce the quality and lifespan as well. Always keep it safe, clean it and anyhow water gets into the device, immediately follow one of the techniques. You will get fully dried binoculars that will be ready to give company in any adventure.